News
Successfully commissioned a Forging Furnace for Sunflag Iron & Steel
Successfully commissioned a Bogie Hearth Furnace for Fittech
We are pleased to have successfully commissioned a Bogie Hearth Furnace for Fittech.
The furnace capacity is 5 MT/batch, and it is suitable for firing with LPG.
The furnace is going to be used for heat treatment of carbon / alloy steel pipe fittings.
Successfully commissioned Bell Annealing Furnaces for Hansa Metallics
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Hansa Metallics, for bright annealing of stainless steel strip coils in hydrogen atmosphere.
The installation comprises of 4 nos. Annealing Bases, 4 nos. Inner Covers, 2 nos. Heating Hoods, 2 nos. Cooling Hoods, Valve Stands, MCC and PLC System The equipment is designed for production capacity of 84,000 MT/annum.
Charge stack is of 2,000 mm diameter and 5,500 mm height. Maximum charge stack weight is 110 MT.
Fuel is LPG, and the combustion system is on pulse-firing basis.
Successfully commissioned a Bogie Hearth Furnace for El Nasr Group, Egypt
We are pleased to have successfully commissioned a Bogie Hearth Furnace for El Nasr Group, Egypt.
The furnace capacity is 25 MT/batch, and it is suitable for firing with natural gas.
The furnace is going to be used for stress relieving / annealing of finished assemblies.
Successfully commissioned a Roller Hearth Furnace for Venus Pipes & Tubes
We are pleased to successfully commissioned a Roller Hearth Furnace for Venus Pipes & Tubes, for solution annealing of stainless steel tubes.
The furnace capacity is 500 kg/hr, and it is LPG-fired.
Successfully commissioned a Top-and-Bottom Fired Pusher Furnace for SA Steel, South Africa
We are pleased to have successfully commissioned a Top-and-Bottom Fired Pusher Furnace for SA Steel, South Africa, for reheating of steel blooms.
The Furnace is of 30 MT/hr capacity, and is suitable for firing with Heavy Furnace Oil / Producer Gas.
Charge is typically 250 mm x 350 mm blooms, of 4,500 mm length (single row charging).
The Furnace has Level-1 Automation.
Successfully commissioned Bell Annealing Furnaces for Light Metals, Malaysia
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Light Metals Group of Industries, Malaysia, for bright annealing of low carbon steel wire coils in hydrogen atmosphere.
The installation comprises of 2 nos. Annealing Bases, 2 nos. Inner Covers, 1 no. Heating Hood, 1 no. Cooling Hood, Valve Stands, MCC and PLC System The equipment is designed for production capacity of 1,300 MT/annum.
Charge stack is of 2,300 mm diameter and 3,500 mm height. Maximum charge stack weight is 15 MT.
Fuel is natural gas, and the combustion system is on pulse-firing basis. The furnace is designed for 850 °C maximum temperature.
All other properties in the Annealed Charge have been achieved, as required.
The Application Software, control philosophy and engineering details for the Project have been developed jointly with Autodata, our Channel Partners.
Appointed Mr. Hanny Rajpal as Senior Project Manager – Bell Furnaces
We are pleased to announce that Mr. Hanny Rajpal has joined our Company as Senior Project Manager – Bell Furnaces. We welcome him into our family, and look forward to many years of doing some good work together.
In his current role, he is looking after Bell Furnaces projects.
He has over 17 years of previous experience in exactly the same type of Projects, and will surely be an asset to our Company.
Successfully commissioned 2 nos. Sloping Hearth Furnaces for Jindal Pipe USA
We are pleased to have successfully commissioned 2 nos. Sloping Hearth Furnaces, from Jindal Pipe USA.
The charge material is carbon steel pipes.
Each furnace capacity is 31 MT/hr, and it is suitable for firing with natural gas.
The furnaces are used for preheating operation.
Currently executing an order for a Sloping Hearth Furnace for Jindal Pipe USA
We are pleased to have received an order for a Sloping Hearth Furnace, from Jindal Pipe USA.
The charge material will be carbon steel pipes.
The furnace capacity will be 40 MT/hr, and it will be electrically-heated.
The furnace will be used for holding operation.
Manufacturing activities are going on currently.
Successfully commissioned Bell Annealing Furnaces for Jindal United Steel
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Jindal United Steel, for bright annealing of stainless steel strip coils in hydrogen atmosphere.
The installation comprises of 4 nos. Annealing Bases, 4 nos. Inner Covers, 2 nos. Heating Hoods, 2 nos. Cooling Hoods, Valve Stands, MCC and PLC System The equipment is designed for production capacity of 54,500 MT/annum.
The Application Software, control philosophy and engineering details for the Project are developed jointly with Autodata, our Channel Partners.
This is a repeat order from Jindal United Steel, of Bell Annealing Furnaces. This is the best compliment that we can receive from Jindal United Steel.
Successfully commissioned Bell Annealing Furnaces for IUP Jindal Group
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for IUP Jindal Group, for bright annealing of steel strip coils in hydrogen atmosphere.
The installation comprises of 2 nos. Annealing Bases, 2 nos. Inner Covers, 1 no. Heating Hood, 1 no. Cooling Hood, Valve Stands, MCC and PLC System The equipment is designed for production capacity of 30,000 MT/annum.
Charge stack is of 2,000 mm diameter and 5,500 mm height. Maximum charge stack weight is 100 MT.
Fuel is LPG, and the furnace has been designed for 850 °C maximum temperature.
The Application Software, control philosophy and engineering details for the Project have been developed jointly with Autodata, our Channel Partners.
Successfully commissioned a Pusher Reheat Furnace for Naveena Group, Pakistan
We are pleased to have successfully commissioned a Pusher Furnace for reheating of steel billets, for Naveena Group, Pakistan.
The Furnace is of 20 MT/hr capacity, and is suitable for firing with natural gas / heavy furnace oil.
Charge is typically 130 - 150 mm billets, of 9,000 mm length (single row charging).
Korus Engineering Solutions are the Consultants for the Project.
Successfully commissioned a Pusher Reheat Furnace for Aarti Steels
We are pleased to have successfully commissioned a Pusher Furnace for reheating of steel billets / blooms, for Aarti Steels.
The Furnace is of 20 MT/hr capacity, and is suitable for firing with HFO / natural gas.
Successfully commissioned a Roller Hearth Furnace for Metamorphosis
We are pleased to have successfully commissioned capacity upgradation work on a Roller Hearth Furnace, for Metamorphosis.
The furnace capacity has been upgraded to 3 MT/hr, and it is suitable for firing with LPG.
The furnace is used for bright annealing of carbon steel tubes.
Successfully commissioned Bell Annealing Furnaces for Aarti Strips, Nepal
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Aarti Strips, Nepal, for bright annealing of stainless steel strip coils in hydrogen atmosphere.
The installation comprises of 5 nos. Annealing Bases, 5 nos. Inner Covers, 3 nos. Heating Hoods, 2 nos. Cooling Hoods, Valve Stands, MCC and PLC System.
Charge stack is 2,000 mm diameter and 5,300 mm height. Maximum charge stack weight is 100 MT.
Fuel is natural gas, and the combustion system is on pulse-firing basis.
This is a repeat order from Aarti Strips, Nepal, of Bell Annealing Furnaces. This is the best compliment that we can receive from Aarti Group.
Successfully commissioned a Bogie Hearth Furnace for Jindal Stainless Group
We are pleased to have successfully commissioned a Bogie Hearth Furnace for Jindal Stainless Group, for heat treatment of stainless steel plates.
The furnace capacity is 25 MT/batch, and it is suitable for firing with natural gas.
Successfully commissioned a Hardening & Tempering Line for IUP Jindal Group
We are pleased to successfully commissioned a Hardening and Tempering Line, for high and medium carbon cold-rolled steel strips, for IUP Jindal Group.
The line comprises of 1 no. Entry Table, 1 no. Hardening Furnace, 1 no. Oil Quenching System, 1 no. Levelling Furnace, 1 no. Tempering Furnace, 1 no. Radiation Jet Cooler, MCC, Thyristor Control Panel and PLC System The equipment has been designed for production capacity of 1,000 kg/hr, and is suitable for firing with natural gas.
Successfully commissioned a Colour Tempering Line for IUP Jindal, through Gallium
We are pleased to have successfully commissioned a Salt Bath type Colour Tempering Line, for bluing of high and medium steel strips, through Gallium, for IUP Jindal.
The line capacity is 500 kg/hr, and it is electrically-heated.
Successfully commissioned a Roll-Down Furnace for Sainest Tubes
We are pleased to have successfully commissioned a Roll-Down Furnace for reheating of steel rounds, for Sainest Tubes.
The Furnace is of 3.5 MT/hr capacity, and is suitable for firing with natural gas.
Charge is typically 40 - 65 mm diameter rounds, of 750 – 2,000 mm length (single row charging).
Successfully commissioned a Pusher Reheat Furnace for Rungta Mines
We are pleased to have successfully commissioned a Pusher Furnace for reheating of steel billets, for Rungta Mines.
The Furnace is of 15 MT/hr capacity, and is suitable for firing with Heavy Furnace Oil.
Charge is typically 130 - 150 mm billets, of 9,000 mm length (single row charging).
Korus Engineering Solutions are the Consultants for the Project.
This is a repeat order from Rungta Mines, of Pusher Reheat Furnace. This is the best compliment that we can receive from Rungta Mines.
We are pleased to have successfully commissioned a Forging Furnace for Sunflag Iron & Steel.
The furnace is electrical-heated, and is used for forging of trial billets.
The furnace is mainly for their R&D purposes.